High performance sublimation and pigment inks for personalization, mass-customization and digital textile printing.
Introducing Virtuoso HD Product Decorating System - the ideal digital printing solution for creating customized and personalized products - Mugs, Phone Cases, T-shirts, Photo Panels and more.
Professional digital heat transfer ink solutions for garment decoration on cotton and cotton-blend fabrics.
Powerful and easy to use Design, Print, Color Management and RIP software. Check out our new online designer - CreativeStudio!
Transfer paper and other media are essential to Sawgrass' sublimation and pigmentation printing systems. Explore solutions for product decorating and wide format systems.
Posted: 6/18/2018 5:40 PM by
Sara Hill | with 0 comment(s)
Printing primary charts is just as important as running nozzle checks for ensuring the best output.
While you may be performing periodic nozzle checks on your SG400 or SG800 to avoid wasting ink on nozzle issues, also consider creating primary charts to pre-emptively troubleshoot color or printing issues.
A good primary chart should show blocks of solid color without lines or steps. Even if you have a perfect nozzle check, you should also check your primary chart to look for irregularities that can cause color and printing issues.
We especially recommend running a nozzle check and primary chart if you have relocated your printer or you have not used it for a while.
If you have a perfect nozzle check, but not a good primary chart, then we recommend that you run two head cleanings before reprinting.
To print a primary chart from Virtuoso Print Manager, follow these easy steps:
Go to the Virtuoso Print Manager icon in your system tray menu and select “Printer Utilities” from the menu options.
In the Utilities window, you can select “Nozzle Check,” “Head Cleaning” or “Primary Chart” from the left sidebar. NOTE: You must print primary charts on standard sublimation paper.
If your printer is working properly, the primary chart will look like the below photo. Nothing more needs to be done.
If calibration and cleaning is needed, the output will show lines like those shown below. If there are any lines in your output, you will need to perform a head cleaning. Continue to step five.
Select “Head Cleaning” in the Utilities tab and select “Clean.” We recommend two head cleanings before reprinting the primary charts again. Continue to run head cleanings until the primary chart shows full blocks of color.
Receive the latest product updates and information from Sawgrass!
© Copyright 2018 Sawgrass Inc. Web Design by BlueKey in Charleston, SC