How To: Baseball Mom Tote Bag

Baseball Mom Tote Bag:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Tote Bag” Icon, go to page 2, and then scroll down to “bag polyester canvas.” 
2. Go to the "Designs" tab and click on the “Sports” Premium folder.  We’re going to use the “Proud Mom” design. 
3. Click on “Select All” in the top panel.  Resize the design to fit. 
4. Click on “Select All” again to deselect.
5. To add text below the design, go to the text feature on the left, and then to the “CreativeStudio” folder.  Select the font “Bebas Neue.”  In the right text box, type the text you want to include.  
6. Go to the right and use “fill color” to change the text color.  We used Hex Code # 05354c.
7. Click on the text box with the players number and change it in the text box on the right.  
8. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on the Sawgrass SG 1000, paper size Tabloid, product “Polyester,” and change color mode to “vivid.”  Then, you will click on print. 
9. If you want to place the design on both sides of the bag, when Sawgrass Print Manager pops up, go to the “Jobs” tab and change the number of copies to 2.  This will give you the same content to put on both sides of the bag.
10. Turn on and set your heat press to 400F and your time to 45 Seconds.
11. Run a lint roller over the bag to remove any dust or fibers before sublimating.
12. Place one design face down and center on the bag, tape down the printed design with heat tape on all sides.
13. Place the bag on the lower heat platen and cover the printed design with blowout paper and press for 45 seconds.
14. Once you remove the bag from the press, tape the second design to the second side and repeat the above step.
15. Slowly lift top platen and quickly remove the printed design.  😊 Enjoy!