How To: I Get Knit Done Tote Bag

I Get Knit Done Tote Bag:

1. Go to the "Blank Products" tab in CreativeStudio and click on the design canvases tab and from there click on 8.5”x11” portrait.  

2. Go to the "Designs" tab and click on the “Makers” premium folder.  Select the “I get knit done” design. 

3. Stretch the design to fit the canvas from side to side you should have an 8.5”x8.5” design.  

4. Move the design to the top of the canvas  

5. Click on the “print” icon on the top right, choose your printer and set your page size to US letter. Turn OFF the mirror and change your product to “Heat Transfer Vinyl(HTV)”  then set color mode to vivid, click print. Sawgrass print manager should pop up click print.  

6. Turn on the heat press, set temp to 311F and timer for 15 seconds. 

7. Place the printed design face up under the heat press with the top platen hovering over the design about 1-2 inches and do not close for 60 seconds. This will set and dry the ink. 

8. Trim excess material and remove the carrier sheet. 

9. Place the pressing pillow inside the tote and pre press the tote for 5 seconds to remove any moisture and smooth out wrinkles. 

10. Lint roll the tote bag to remove any lint or Debris. 

11. Place Siser EasySubli on the tote bag with the design facing up and cover It with a piece of parchment paper then press for 15 Seconds.  

12. Remove parchment paper and enjoy!