How To: Mountain Map Keychain

Mountain Map Keychain:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Key Chains” Icon then go to page 3. Scroll to “rounded square key chain” and click to select it.  
2. Go to “Designs” tab and then to the “Map Maker” premium folder.    Choose the “Mountain” design.  
3. Click on “Select All” in the top panel.  Resize and center the design.
4. Click on “Select All” again to deselect.
5. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on your printer name, paper size letter, product “MDF Board,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
6. Turn on and set your heat press to 400F and your time to 60 Seconds.
7. If you would like to do multiples of this keychain, when you file opens in Sawgrass Print Manager, go to the layout tab and make sure “print manager performs layout” is selected.
8. Go to the jobs tab and change number of copies to 6. 
9. Go back to the layout tab and change the spacing to .25.  This keeps the keychains from being too close together but does allow them to be on one page. 
10. Place your design face down and center on the keychain, tape down the printed design with heat tape.  
11. Place the keychain on the lower heat platen and cover the printed design with blowout paper and press for 60 seconds.
12. Slowly lift top platen and quickly remove the printed design.  😊 Enjoy!