How To: My Jam Sequined Tote Bag

My Jam Sequined Tote Bag:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Tote Bag” Icon then scroll down to “Sequin Tote Bag.”
2. Go to the "Designs" tab and click on the “Featured Designer Lori Whitlock” Premium folder.  We’ll be using the “This is my Jam” Design. 
3. Do a “select all” on the design and resize it to fit.  Don’t worry if the background is not a perfect fit. 
4. Click again to remove the “select all”
5. Click on the background to resize it to fill the entire area. 
6. If you want to change things up a bit, change either the label or the background to Hex Code ff8c7c. 
7. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on the Sawgrass SG 1000, paper size Tabloid, product “Metal,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
8. Turn on and set your heat press to 357F and your time to 120 Seconds.
9. Make sure that all sequins have the white side up. 
10. If you got finger prints on the sequins, you can go over them with a lint free cloth and alcohol. 
11. Place your design face down and center on the sign, tape down the printed design with heat tape on both sides.
12. Place the sign on the lower heat platen and cover the printed design with blowout paper and press for 120 seconds.
13. Slowly lift top platen and quickly remove the printed design.  😊 Enjoy!