How To: Set of 4 Square Spring Coasters

Set of 4 Square Spring Coasters:

1. Go to the "Blank Products" tab in CreativeStudio and use the search bar to look for the “square coaster set”.  

2. Go to the "Backgrounds" tab and click on the “Holidays” premium folder.  Select the “Bunny spring floral” design.  

3. Resize the image by dragging in one of the black squares around the design or by using the scale bar on the right of the screen. 

4. Place the design in the center of one of the coasters and size out into the gray area. 

5. Repeat this same process for the remaining coasters. If you want a bigger pattern simply use one pattern and stretch across all for coasters.  

6. To add the Design, click on the “Designs” icon on the left and find and click on the “spring” free folder now click on “let happiness bloom” design resize and adjust the placement, repeat this process for each coaster. 

7. Now we are ready to print, click on the “print” icon at the top right. 

8. From here choose your printer and set your paper size to us letter, for the materials change the product to “MDF board” and set the color mode to vivid. Click print you should see Sawgrass print manager pop up and click print.  

9. Turn on your heat press and set the temp to 400F and the timer to 60 seconds  

10. Clean the top of the coasters with a lint free cloth and place them face down on printed designs secure easy one with heat transfer tape. 

11. Place a piece of blowout paper on the lower heat platen then place the coasters on top with the sublimation paper facing up. Now place another piece of blowout paper on top and press for 60 seconds with medium pressure. 

12. With heat gloves quickly remove the sublimation paper from the coaster, set aside and let them cool. 

13. Enjoy!