How To: Travel Quote Luggage Tag

Travel Quote Luggage Tag:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Tote Bag” Icon then go to page 2. Scroll to “bag tag” and click to select it.  
2. Go to “Designs” tab and then to the “Jet Setter” premium folder.    Choose the “Airplane Pattern” design.  
3. Click on “Select All” in the top panel.  Resize and center the design.
4. Click on “Select All” again to deselect.
5. To add text, click on the Text icon on the left panel.  In the Creative Studio folder, choose the font “Cutie Mono.”  
6. If you want to do different sizes for the lines, do each line as a separate line of text.  
7. We used the phrase “I haven’t been everywhere, but it’s on my list” and kept the font color black.  
8. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on your printer name, paper size letter, product “MDF Board,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
9. Turn on and set your heat press to 400F and your time to 60 Seconds.
10. If you are using a double-sided blank and want to add an address to the back, in CreativeStudio, choose another bag tag and use the Cutie Mono font to type that address.
11. When printing, as long as the settings are the same, this will open in the same Print manager window.
12. On the layout tab change the spacing to .25.  This keeps the luggage tags from being too close together but does allow them to be on one page.  
13. Place your design face down and center on the tag, tape down the printed design with heat tape.  
14. Place the keychain on the lower heat platen and cover the printed design with blowout paper and press for 60 seconds.
15. Slowly lift top platen and quickly remove the printed design.  😊 Enjoy!