How To: Gamer Mode Cotton T-Shirt

Gamer Mode Cotton T-Shirt:

•  Under blank products, choose the T-shirt you will be using.  Find the Gamer Mode design in the Premium Gaming folder and click on once to add.
• Resize the design by clicking on the Select All icon at the top. Use one of the black squares to stretch the design to the desired size and center on the T-shirt.  
• Load your Siser EasySubli HTV shiny side up in your printer.
• Click on the “print” icon on the top right, choose your printer and set your page size to US letter. Change your product and paper to Siser Easy Subli Vinyl.  Turn off the mirror. Set color mode to vivid, click print. Sawgrass print manager should pop up click print.  
• Turn on the heat press, set temp to 311F and timer for 15 seconds. 
• Place the printed design face up under the heat press with the top platen hovering over the design about 1-2 inches and do not close for 60 seconds or let the printed design sit overnight. This will set and dry the ink. 
• Trim excess material around your design and remove the carrier sheet. 
• Pre-press the T-shirt for 5 seconds to remove any moisture and smooth out wrinkles. 
• Lint roll the T-shirt to remove any lint or debris. 
• Place Siser EasySubli on the T-shirt with the design facing up. Secure the design with heat tape or adhesive spray. Cover it with a piece of parchment paper then press for 15 seconds.  
• Remove parchment paper and enjoy!
• Wait 24 hours to wash your T-shirt.