How To: Breast Cancer Support Skinny Tumbler

Breast Cancer Support Skinny Tumbler:

1. Go to the "Drinkware" tab in CreativeStudio and click on the “Design Canvases” Icon then go to page 4, scroll down, and click on “LumaSteel 20oz Skinny Tumbler.”
2. Go to the "Designs" tab and click on the “Breast Cancer Awareness” Premium folder.  Select the “Team Sandra” Design. 
3. Do a “select all” to resize the design and put it on the left side of the tumbler.  Then click on “select all” again to deselect.
4. Click  on the name “Sandra” to change the name.  This can be done in the right Text panel.
5.  Go back to the “Designs” tab and click on the “Breast Cancer Awareness” Premium folder.  Select the “Support Squad” design. 
6. Stretch the pink background to fill the entire area.  You will need to unlock aspect ratio on the right appearance panel.  You may need to send this to the back.
7. You’ll need to manually move and resize the pieces of the support squad art, but there are not may pieces. You can turn on the grid at the top to help you as line these up.
8. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on the Sawgrass SG 1000, paper size US Letter, product “stainless steel tumbler,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
9. Turn on and set your heat press to 285F and your time to 60 Seconds.
10. Place your design face down and center on the sign, tape down the printed design with heat tape on all sides.
11. You will press your design for 60 seconds, open the press, rotate the tumbler, and then close the press to press for another 60 seconds.
12. Slowly open the tumbler press and quickly remove the printed design.  😊 Enjoy!