How To: Fiesta Stainless Steel Lowball

Fiesta Stainless Steel Lowball:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Drinkware” Icon then scroll down to the “10 ounce Stainless Steel Lowball.”  
2. Go to the "Designs" tab and click on the “Fiesta” Premium folder.  Scroll to the “Fiesta, Siesta, Tequila” design and click on it. 
3. Click on the background, and hit trash from the top panel to delete it.
4. Choose “select all” from the top menu.  
5. Resize the design and move it to the left side of the print area.  
6. With select all still in place, hit duplicate on the right side. 
7. Move the copy to the right side of the can cooler. You’ll have to move the pieces separately.
8. Go back to the Fiesta designs folder and choose the flags background.  You’ll need to maneuver and resize this manually.
9. From the Appearance panel, use “Send Backwards” to put it behind the design.  
10. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on your printer, choose the paper size you will be using, set the product to “stainless steel tumbler,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
11. Turn on and set your tumbler/mug heat press to 380F and your time to 60 seconds.
12. Make sure to remove the cap before putting the highball in the press.
13. Rubbing Alcohol and a lint free cloth can be used to remove fingerprints from metal.
14. Place your design face down and center on the sign, tape down the printed design with heat tape on all edges.
15. Place the low ball in the press and close.
16. When the timer goes off, rotate the tumbler and close the press for another 60 seconds.
17. After timer goes off, slowly open the press quickly remove the printed design.  😊 Enjoy!