How To: FRY Day Retro Design Tumbler

FRY Day Retro Design Tumbler:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Drinkware” Icon then go to page 7, scroll up, and click on “LumaSteel 20oz Skinny Tumbler.”
2. Go to the "Designs" tab and click on the “Food and Drink” Premium folder.  Select the “French Fries” Design. 
3. Do a “select all” to resize the design and put it on the left side of the tumbler.  Then click on “select all” again to deselect.
4. You may need to move elements of the design to get the best fit in the area.  We moved the top and bottom text away from the French Fries and rearrange the text beside them as well.  
5. Once you are done, choose select all from the top panel and then duplicate from the right panel.  
6. You’ll need to manually move and resize the pieces of the design to repeat the design on the right side. You can turn on the grid at the top to help you as line these up. 
7. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on the Sawgrass SG 1000, paper size US Letter, product “stainless steel tumbler,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
8. Turn on and set your heat press to 380F and your time to 120 Seconds.
9. Place your design face down and center on the sign, tape down the printed design with heat tape on all sides.
10. Since this design is not a full wrap, you do not need to rotate during pressing.  Place it in the press and press for 120 seconds.
11. Slowly open the tumbler press and quickly remove the printed design.  😊 Enjoy!