How To: Full Wrap Coffee Mug

Full Wrap Coffee Mug:

1. Go to the "Blank Products" tab in CreativeStudio and use the search bar to look for the 11oz ceramic mug you can also find It under the “Drinkware” folder. 

2. Go to the "Designs" tab and click on the “Gardening” premium folder.  Select the Farmers market design. 

3. Click on the “select all” icon at the top, use the black square on one of the corners to drag in and out to resize.  

4. While you still have the select all activated move the design over to the right or left of the mug depending on your preference, click on the select all icon to release. 

5. Select the back layer and drag it until it covers outside the gray border.  

6. Now you’re ready to print click on the “printer” icon at the top right, select your printer and set paper size to us letter. When using the mug template, the product is pre-set to ceramic mug, now click print. The Sawgrass print manager should pop up, then click print. 

7. Turn on and set your mug press temp to 400F and the time for 4 minutes and 30 seconds.  

8. Clean your mug with a lint free cloth  

9. Trim your printed design down to size, then center on your mug tape down both sides. 

10. Place your mug in the heat press and close for 4 minutes and 30 seconds 

11. With heat gloves remove the mug and set aside to cool  

12. Once cooled, peel and enjoy!