How To: Mothers Day Queen of Hearts Skinny Tumbler

Mothers Day Queen of Hearts Skinny Tumbler:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Drinkware” Icon then go to page 5, scroll down, and click on “LumaSteel 20oz Skinny Tumbler.” 
2. Go to the "Designs" tab and click on the “Mothers Day” Premium folder.  Select the “Queen of Hearts” Design.  
3. Do a “select all” to resize the design and put it on the left side of the tumbler.  Then click on “select all” again to deselect.
4. To add the hearts above and below the design, click on the heart in the design.  On the right appearance panel, select “duplicate.”  Note:  If you grabbed something other than the heart, you can hit the trash button up top to delete it and try again.  
5. On the right appearance panel, choose fill color to change the color of the heart.  We used hex code #f59191.  
6. Resize and rotate the hearts using the options around the image or use the sliders for scale and rotate from the appearance panel on the right.
7. Duplicate the adjusted heart to add another, and then rotate and position it where you’d like.  You can add as many hearts above and below the design as you like.
8. We added names by going to the text option on the left and choosing the font Vidaloka from the Creative Studio font folder. Add the name in the text panel on the right.
9. On the Appearance panel, use fill color to change the color of the text.  We used white, which would be a CMYK value of all zeroes.
10. Duplicate the text, and then rotate to fit another heart.  Change the text to another name.
11. Repeat step 10 as many times as needed.  
12.  Once you are done, choose select all from the top panel and then duplicate from the right panel.  
13. You’ll need to manually move and resize the pieces of the design to repeat the design on the right side. You can turn on the grid at the top to help you as line these up. 
14. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on the Sawgrass SG 1000, paper size US Letter, product “stainless steel tumbler,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
15. Turn on and set your heat press to 380F and your time to 120 Seconds.
16. Place your design face down and center on the sign, tape down the printed design with heat tape on all sides.
17. Since this design is not a full wrap, you do not need to rotate during pressing.  Place it in the press and press for 120 seconds.
18. Slowly open the tumbler press and quickly remove the printed design.  😊 Enjoy!