How To: Old Fashioned Enamel Mug

Old Fashioned Enamel Mug:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Drinkware” Icon then go to page 5. Scroll down to the “11 ounce Camp Cup”  
2. Go to the "Designs" tab and click on the “Nature” Premium folder.  Choose the “Good by Nature” Mushroom design.
3. Choose “select all” from the top menu.  
4. Resize the design and move it to the left side of the print area.  
5. With select all still enabled, hit “duplicate” on the right menu.
6. You will need to move all pieces of the design to the right side and you may need to use the “arrange” functions on the right side to get them back in the correct order.
7. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on your printer, choose the paper size you will be using, set the product to “stainless steel tumbler,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
8. Turn on and set your tumbler/mug heat press to 400F and your time to 260 Seconds.
9. Rubbing Alcohol and a lint free cloth can be used to remove fingerprints from metal.
10. Place your design face down and center on the sign, tape down the printed design with heat tape on all edges
11. Place the mug in the press and close.  
12. After timer goes off, slowly open the press quickly remove the printed design.  😊 Enjoy!