How To: Thank you, Coffee Mug

Thank you, Coffee Mug:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Drinkware” tab use the search bar to type 11oz from here you can select the 11oz mug blank canvas. 
2. Go to the "Designs" tab and use the search bar to type in “Thank you” select the  “Muchas Gracias” premium design.   
3. Resize the design by clicking on the “select all” icon use the black squares to adjust the size in or out.
4. While still select all is still active move the design all the way to the left of right depending on your preference, click on the select all icon to release the layers. 
5. Click on the stars layer and click on the “duplicate” icon on the right, click on the plus at the bottom left of the screen to zoom in, line up your stars layer to the other on repeat this process one more time until the stars are all the way across the canvas.
6. Now we are ready to print, click on the “print” icon at the top right.
7. From here choose your printer and set your paper size to us letter, for the materials change the product to “ceramic” and set the color mode to vivid. Click print you should see Sawgrass print manager pop up and click print. 
8. Turn on your mug press and set the temp to 400F and the timer to 210 seconds.
9. Clean the mug with a lint free cloth trim down the printed design and center on the mug, tape down one side, pull tight and tape down the next, there should be no gaps.
10. Place the mug in the mug press and close with medium pressure for 210 seconds. (Depending on your mug press time and temp may vary)
11. Remove the mug from the press, set aside to cool, remove the sublimation paper from the mug and enjoy!