How To: Castle Door Hanger

Castle Door Hanger:

In Creative Studio, under Blank Products, search for a door hanger or door sign that best suits your door hanging substrates dimensions. If you cannot find one the fits just right, you can create a Custom Canvas for this project. Once you have your product selected, go to Designs, in the Fairytales Premium folder, select the “Welcome to Our Castle” design.
 
Resize your design to fit your substrate by clicking Select All and then dragging the corner of the design larger or smaller. Then center your design and unclick Select All.

Load your sublimation paper bright side down in your printer.

Press the print button at the top right had corner of your screen. Set your page size to US Letter, mirror your print, change the product to ceramic tile, or metal depending on your substrate, paper to True Pix Classic, and color mode to vivid. Then click print. Once the Sawgrass print manager pops up, click print again.

Lint roll your substrate. Then align your print on your substrate and use heat tape to secure. With heat gloves on, and parchment or butcher paper on both above and below the door hanger, lay the substrate transfer side down on your heat press. Press with medium pressure at 400 degrees Fahrenheit for 60 seconds if metal.

Remove from the heat press, allow to cool, take off the transfer, your new door hanger is ready to use!