How To: Gather & Give Thanks Cheese Board with Ceramic Tile

Gather & Give Thanks Cheese Board with Ceramic Tile:

1. Go to the "Blank Products" tab in CreativeStudio and click on the “Kitchen & Dining” Icon then go to page 3, scroll down, and click on the “Cheese Board with Ceramic Tile.”
2. Go to the "Designs" tab and click on the “Thanksgiving” Premium folder.  Select the “Triple Pumpkin Wreath” design featuring the words “Gather & Give Thanks”.
3.  The design should be in the center of the canvas.
4. The background will need to fully cover the area.  Select the background, and then unlock aspect ratio on the right appearance menu and drag the background to fill the area. 
5. You can change the color of the background by selecting the layer and clicking on the fill color icon on the right. You can pick a color that matches your home décor.   Here are some complimentary hex codes that you might want to try:  d3efd9, ebe6ca, eed7ab, or ddebf2.
6. Now we are ready to print; click on the "Print" Icon at the top right the printer should be set on your printer, paper size US Letter, product “Ceramic Tile,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
7. Turn on and set your heat press to 375F and your time to 330 Seconds.
8. Place your design face down and center on the tile, tape down the printed design with heat tape.
9. Place the sign on the lower heat platen and cover the printed design with blowout paper and press for 330 seconds.
10. Slowly lift top platen and quickly remove the printed design. 
11. Make sure to let the tile sit and cool.  😊 Enjoy!