How To: Sweet Christmas Gift for Neighbors and Friends

Sweet Christmas Gift for Neighbors and Friends  Thumbnail
Sublimation makes for a great Holiday gift for friends and neighbors!  Add some baking supplies to this mitt to create a sweet surprise. 

Skill Level:

Sweet Christmas Gift for Neighbors and Friends  Teaser


Premium CreativeStudio Membership 
Sawgrass SG 500 or 1000
15”x15” Heat Press or larger
11”x17” sublimation paper or larger
Oven Mitt
Lint Roller
Heat Tape 
Optional:  Foam Pad, or other pad
Blowout paper 

Pressing Guide

  • Time: 60 seconds
  • Temperature: 375 degrees F
  • Pressure: Moderate

Sweet Christmas Gift for Neighbors and Friends:

  1. Go to the "Blank Products" tab in CreativeStudio and click on the “Kitchen & Dining” Icon then go to page 4. Scroll to “Oven Mitt” and click to select it. 
  2. Go to the "Designs" tab and click on the “Sweet Holiday” Premium folder.  Select the “Sweet Candy Cane Christmas” design.
  3. Click on “Select All” in the top panel.  Resize and center the design, focusing on the image itself and ignore the background. 
  4. Click on “Select All” again to deselect.
  5. Select the background and stretch it to fill the area.  You may walk to click on “lock aspect ratio” on the right side to make this easier. 
  6. Now we are ready to print, click on the "print" Icon at the top right the printer should be set on your printer, choose the paper size you will be using, set the product to “polyester,” and change color mode to “vivid.”  Then, you will click on print. Sawgrass Print Manager should pop up and click on print.
  7. Turn on and set your heat press to 375F and your time to 60 Seconds.
  8. Run a lint roller over the mitt to remove any dust or fibers before sublimating.
  9. A foam pad placed inside the mitt may stretch it and help you get the print all the way around the sides. Make sure the print is bigger than the mitt.
  10. Place your design face down and center on the mitt, tape down the printed design with heat tape on both sides.
  11. Place the mitt on the lower heat platen and cover the printed design with blowout paper and press for 60 seconds.
  12. Slowly lift top platen and quickly remove the printed design. 
  13. Fill the mitt with baking tools and a bag of cookie mix. Tie it all up with a ribbon – and include a cookie cutter in the bow!  😊

You Might Also Like to Make:

Sequin Pillowcase Image

Sequin Pillowcase

What could be better than a pillow that combines sequins, unicorns, rainbows, and a positive message? 

Start Creating

Citrus Themed Glass Cutting Board Image

Citrus Themed Glass Cutting Board

This citrus themed glass cutting board will sweeten the look of any kitchen.   

Start Creating

Coronation Tea Coaster Image

Coronation Tea Coaster

What better way to celebrate the Coronation of the King than with these adorable coasters for the occasion!  

Start Creating

Monogram Decorative Pillow Image

Monogram Decorative Pillow

This pretty monogram pillow is the perfect addition to brighten up any décor. 

Start Creating

Welcome Gnome Sign Image

Welcome Gnome Sign

The perfect addition to your home for Spring! Who doesn’t like a good Gnome Pun?   Add some ribbons for a front door wreath or display anywhere in your house.   

Start Creating

Matisse Inspired Global Coasters Image

Matisse Inspired Global Coasters

These Matisse inspired coasters will be the perfect addition to any table.  You can do all of your coasters with one of the global designs, or mix it up and do a different country on each.

Start Creating

Get 25% Off Premium Membership

CreativeStudio premium membership gives you access to hundreds of trendy, royalty-free designs. Use code GIVEBACK25 to get 25% off your first month.

Become a Member